|
|
|
|
eFoam-I series
eFoam-I series are cross-linked by electron beam (EB) radiation (without chemical corss-linker). These are closed-cell polyolefin foam products and can be supplied in rolls.
Specification range:
- Density:
- 25~460kg/m3
- Foam Expansion ratio:
- 2~40
- Thickness:
- 2.0~12.7mm
- Width:
- 600~1800mm
Characteristics of the products
- Roll product with thickness 2.0~12.7mm (single layer), and up to 40mm (laminated layers)
- Cross-linked by electron beam (EB) radiation with excellent homogeneous properties
- The product presents the fine smooth surfaces with even and fine closed cell structure
- Wide process temperature (-80℃~110℃, even up to 140℃ for a special specification)
- Excellent thermal insulation material
- Excellent impact acoustic insulation
- Extremely low water absorption or moisture penetration rate
- Good weatherability
- Good chemical resistance
- Suitable for thermal and vacuum molding
- Non-toxic, no odor and no volatile organic compounds (VOC)
- Meet Taiwan EPA Eco Label 1st and 2nd Category..
- Comply with European Union (EU) RoHS requirements
- Clean foaming production process without CFCs, HCFCs, plasticizer, organic solvent and other flammable hydrocarbons
- Choices of various hardness of the products with multi-functional performances
- With flame-retarded grade product (IR, meets the requirements of UL 94 HF-1 & FMVSS 302 )
Description of product specifications:
| I.. |
General grade |
| II. |
Light, hard, excellent stiffness. |
| IR |
Flame retarded product, comply with the requirements of UL 94 HF-1 & FMVSS 302, and RoHS |
| IE. |
Soft touch |
| IEE |
Softer than IE. grade |
| I*. |
Electro-conductive product |
| IB. |
Anti-bacteria product |
| IUV |
UV resistant product |
| IM. |
Good thermal molding |
| IG. |
Good compression set and thermal molding |
| IS. |
Improved vacuum thermal molding |
| IP. |
PP product with good vacuum thermal molding and dimensional stability |
|
|
